Training Electric Power System Protection

Training Electric Power System Protection

Construction of generation plants, transmission and distribution of electrical energy systems is a costly business. At both levels of national grid systems and local industrial plants, two important aspects are at the heart of this strategic industry. These are the reliability of energy delivery to meet customers’ demands and safe operation. At different stages of energy processing i.e. at the generation, transmission and energy delivery stage, protection of personnel and equipment is of prime importance. To achieve these goals, protection schemes are to be employed. The philosophy adopted in any protection scheme is to clear faults with a minimum system disruption, at a high speed, and in a simple and economical way.

The course deals with different types of protection schemes used in large networks and those adopted in industrial plants. It describes some of the important components such as relays, comparators and other protective gears, and techniques and calculations used for their settings. This Electric Power System Protection Training Program also reflects on recent development and what are new in this important field of electricity industry.

Electric Power System Protection Training Objectives

The following sees the benefits from this course:

1. On organizational level

• It introduces the subject of protection as an art where technical and economical constraints are to be met and compromised to achieve certain engineering requirements.
• Learn to develop and manage well-protected plants that lead to a higher security, less outages and hence better profitability.
•The course introduces new technologies used in relaying systems such as microprocessor and computer relaying which put organizations at the forefront of modern electricity industries.
• Helps organizations in making appropriate decisions at times of system expansion or in situations where new developments become necessary.
• Help organizations to understand causes of system failures, means available for remedies and hence better system management and operation with minimum investment.

2. Personal Impact

• Introduces and acquaints attendees with different components used in protection schemes.
• Ability to perform some basic essential calculations required for relay settings.
• Establishes confidence in dealing with protection schemes installed for protecting personnel equipment to grantee flow of energy.
• Learn how to assess protection performance.
• Add knowledge on how to improve security level by designing better protection systems with aim to improve performance.
• Learn about error sources introduced by some protection scheme components and how to overcome them.

Course  Content

1. Fundamentals of Protection Practice and Basic Technology

• Protective Gear.
• Reliability
• Selectivity
• Speed,Stability and Sensitivity
• Circuit quantities & conventions
• Fault calculations

2. CTs Requirements

• Error in CTs and compensation
• Accuracy limit current of CTs
• Class X CTs and linear CTs
• Transients in CTs
• Practical conditions

3. Static Relays

• Circuits using analogue techniques
• Digital techniques
• Output and Tripping circuits
• Electrical Interference
• Future trends

4. Protection Schemes and substation design diagrams

• Generator protection
• Motor protection
• Transformer protection
• Line Protection
• Substation Design Diagrams

5. Differential protection

• Classification of differential protection
• Direction comparison
• Circulating current and balanced voltage systems
•  Transformer differential protection
• Differential protection for generators and rotating machines
• Line differential protection
• Busbar-differential protection
• Differential system with multiple restraint
• High impedance differential system

6.Industrial Power System Protection

• Busbar arrangement
• Discrimination
• HRC fuses
• Industrial circuit-breakers
• Infeed fault current from induction motor
• Automatic changeover systems
• Voltage and phase reversal protection
• Private generation

7. Installation, testing and maintenance of protection systems

• Installation of protection equipment
• Testing protection schemes.
• Pre-commissioning tests,
• Installation resistance measurements
• Secondary injection tests
• C.Ts tests
• Periodic maintenance
• Setting and testing numerical protection

TRAINING METHOD

• Group Discussions
• Group & Individual Exercises
• Presentations
• Games
• Case Studies
• Role Plays
• Self-Assessment
• Action Plan

FACILITIES

• Certificate,
• Quality Training Kit (Pencil case: Erase, Bolpoint, Pencil, Tipe X, Stabillo, Flash Disk 8 GB),
• Bag.
• Training Material (HandOut & SoftCopy)
• Convenient training facilities in stars hotel (Public Training)
• Lunch and Coffee Breaks (Public Training)
• Souvenir

Permintaan Brosur penawaran Training ( Harga, Waktu dan Tempat) silahkan Menghubungi kami.

Catatan :

• Pelatihan ini dapat di-customized sesuai kebutuhan perusahaan Anda bila diselenggarakan dalam bentuk In-House Training. Untuk permintaan In-House Trainingdengan jenis topik lainya, silahkan mengirimkan ke alamat email yang tercantum di web kami.
• Request Training. Jika anda membutuhkan informasi pelatihan yang belum tercantum pada website ini, atau anda ingin memberikan usulan materi yang sesuai dengan tingkat kebutuhan perusahaan anda, silahkan mengirimkan ke alamat emailyang tercantum.
• Bila tidak ada tanggal dan waktu atau yang tercantum sudah kadaluarsa didalam artikel mohon tanyakan kepada kami untuk jadwal terbarunya.
• Peserta bisa mengajukan Tanggal Pelatihan / Training selain yang tertera pada silabus penawaran.

 

Info Jadwal Training , Training, Training di Bandung, Training di Jakarta, Training di Bali, Training di Yogyakarta, Training di Lombok, Training di Surabaya, Training di Malang, Training di Solo, Training di Medan, Training di Manado, Training di Batam, Training di Semarang, Training di Bogor,